Brother printers are Japanese electronic printing machines and known for their excellent and praiseworthy printing and customer service. Being of Japanese descent you’ll be happy because you’re not going to face any issues with these printers. And because everybody knows a printer is running on the toner cartridge and drum machine, the printer is the same as that.
But if you think the ink in your toner is done then you are on the right track to learn how to change the Brother printer toner. Even if you don’t know how to proceed, you ‘re not going to panic because you landed on the right spot. This article was written in response to your request. Nevertheless, you must learn the difference between toner and drum units before continuing.
Toner Cartridge and Drum System introductions!
Toner is a container which holds toner powder to supply ink for printing. Whereas a drum unit is a cylinder that is electrically charged and transfers toner powder and ink to paper to print the necessary material. And cartridge toner and drum machine work together. And you should follow the steps below to learn how to change toner on Brother printer along with drum panel.
Adjust The Easy Steps Toner and Drum System!
You ‘re need to prepare a new cartridge for the printer before you know how to change the toner on a Brother Printer. So first let’s know in the steps below how to prepare a new cartridge!
Steps to Prepare Your Brother Printer ‘s New Cartridge!
Next, unbox the latest cartridge you got, and then remove its wrapping.
Flip the cartridge downwards and then remove the safe orange clip from it.
Remove the sealed tape from the side of the cartridge from the trash can.
This tape can come out conveniently in one single strip that you can throw.
And your cartridge is now ready for installation in your printer.
Steps to get your Drum Unit ready!
Unbox the drum machine, and remove it from the packaging.
And now you will cut the orange security device that’s covered by the drum machine.
And you should follow the steps below to learn how to replace toner on Brother Printer in an simple way after you set your new cartridge to be ready for installation.
Now on Brother Printer Learn How to Change Toner Cartridge!
Switch the printer on, and open the front cover.
Remove from your printer the toner cartridge and drum unit, and release the toner cartridge from the drum unit assembly.
This can be done by pushing down the green lock lever on the drum unit’s left side, and removing the toner cartridge from the drum unit.
After having the latest toner cartridge unpacked.
Expel cover for security.
You will place the new toner cartridge in the drum unit immovably before you hear it lock in.
Ensure that you position the toner cartridge correctly or that it can detach from the drum assembly.
Clean the crown wire inside the drum device by moving the green tab softly from left to right, and a few times from right to left.
You may now reinstall the toner cartridge and drum machine into the printer.
Remove the Printer’s front cover.
Hence, you can learn how to replace toner for Brother Printer with the help of the above steps and make your printing easier.
Remember not to turn off the brother printer or open the front cover before Ready Mode is returned to the printer.
A Starter toner cartridge is the toner cartridge that goes with your printer.
Holding a fresh toner cartridge ready for use when you see the Toner Low Admonition is a good idea.
We recommend using only Genuine Brother printers toner cartridges, to ensure excellent printing.
Remember not to unpack the latest toner cartridge until it’s ready for use.
The toner life will be abbreviated if a toner cartridge is left unpacked for quite some time.
Brother Printer strongly recommends you don’t refill your printer’s toner cartridge.
Seeking help from Help Team!
To consumers who have not understood how to change or upgrade toner and drum units it is safe to contact Brother Printer’s customer service. This customer service is active 24/7 on various platforms so that the users can be assisted at any time regardless of time zone.
So if you want some other support apart from the question of changing toner then you can contact the customer service without hesitation.